linux input subsystem虚拟键盘和鼠标

　　1  event device

　　in /dev/input/event?

　　cat data from /dev/input/event？ the data format is :

　　struct input_event {

　　struct timeval time;

　　__u16 type;

　　__u16 code;

　　__s32 value;

　　};

　　e.g :

　　xx xx xx xx yy yy yy yy tt tt cc cc vv vv vv vv

　　xx is usec

　　yy is sec

　　tt is type

　　cc is key code

　　vv is value, might be it means keyup or keydown

　　for mouse event, you can get the same message format

　　xx, yy is the same as keyboard

　　tt is EV_REL, it means the value feild is relative distance;

　　cc is REL_X or REL_Y

　　vv is the value of relative distance

　　2 register input_dev

　　/**************************

　　for virtual mouse

　　**/

　　static int  vkm_vmouse_register(void)

　　{

　　struct input_dev *vmouse_dev;

　　vmouse_dev = input_allocate_device();

　　if (!vmouse_dev)

　　return -ENOMEM;

　　vmouse_dev->name = "VMouse ";

　　vmouse_dev->phys = "xxmouse/input1";

　　vmouse_dev->id.bustype = BUS_HOST;

　　vmouse_dev->id.vendor = 0x0001;

　　vmouse_dev->id.product = 0x0002;

　　vmouse_dev->id.version = 0x0100;

　　vmouse_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);

　　vmouse_dev->keybit[BIT_word(BTN_MOUSE)] =

　　BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);

　　vmouse_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);

　　/* error check */

　　error = input_register_device(vmouse_dev);

　　if (error) {

　　input_free_device(vmouse_dev);

　　return error;

　　}

　　}

　　/**************************

　　for virtual keyboard

　　**/

　　static int  vkm_vkbd_register(void)

　　{

　　int i, error;

　　struct input_dev *vkbd_dev;

　　vkbd_dev = input_allocate_device();

　　if (!vkbd_dev)

　　return -ENOMEM;

　　vkbd_dev->name = "VKBD Keyboard";

　　vkbd_dev->phys = "atakbd/input0";

　　vkbd_dev->id.bustype = BUS_HOST;

　　vkbd_dev->id.vendor = 0x0001;

　　vkbd_dev->id.product = 0x0001;

　　vkbd_dev->id.version = 0x0100;

　　vkbd_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);

　　vkbd_dev->keycode = atakbd_keycode;

　　vkbd_dev->keycodesize = sizeof(unsigned char);

　　vkbd_dev->keycodemax = ARRAY_SIZE(atakbd_keycode);

　　for (i = 1; i < 0x72; i ) {

　　set_bit(atakbd_keycode[i], vkbd_dev->keybit);

　　}

　　/* error check */

　　error = input_register_device(vkbd_dev);

　　if (error) {

　　input_free_device(vkbd_dev);

　　return error;

　　}

　　return 0;

　　}

　　send keyboard event to input handler like this：

　　input_report_key(vkbd_dev,KEY_A,0);

　　input_sync(vkbd_dev);

　　and send mouse event to input handler like this：

　　input_report_rel(vmouse_dev, REL_X, 10);

　　input_report_rel(vmouse_dev, REL_Y, 10);

　　input_sync(vmouse_dev);

关键词标签：linux,input,subsyste